Table of Contents
Advertisement
Welcome
Thank you for purchasing ZeroWire!
ZeroWire can be set up in 4 steps and the voice guide will walk you through each
of the menus and settings.
1
Install
your
ZeroWire
IMPORTANT
There are three (3) ways to program your ZeroWire system:
Via DLX900 Management Software – The recommended way to program your
ZeroWire system from a PC. DLX900 is compatible with Windows 7, 8, and 10.
Via built-in ZeroWire Web Server – Access all programming menus from the
built-in web browser from a PC without the need to install any software.
Via UltraSync + app – This provides access to the built-in ZeroWire Web Server
via a smartphone app.
This manual describes the steps needed to program each feature using the Web
Server. Screen shots of the ZeroWire Web Server are also included for your
reference. Similar screens appear on the UltraSync + app.
Instead of using the keys on the front of the ZeroWire, you can also set up the
system with the built-in web server interface using a browser (see "Installation
Using Web Server" on page 57), an application for mobile devices (see "Installing
UltraSync + app" on page 40), or the DLX900 management tool (see "DLX900
Software" on page 99).
Please read through this guide before starting the installation.
Features and benefits
•
40 Users – enough for moderate sized businesses
•
64 Zones + 25 Keyfobs – provides a large coverage area
•
4 Areas – split your system into smaller parts you can protect individually
•
Dynamic Key Lighting – lights up the available options to make it easier to
program
•
Personal Voice Guide – steps you through customizing your system
•
2 Inputs – integrate non-wireless devices to your security system
•
2 Programmable Outputs – connect other devices such as siren and strobe
ZeroWire Installation Manual
2
Add your
detectors
3
Add users
& keyfobs
4
Customize
your
system
11
Hide quick links:
Advertisement
Table of Contents
