Enabling Camera - Interlogix ZEROWIRE ZW-6404 Installation Manual

Enabling Camera Recording
Adding Camera to UltraSync + app
Make sure the ZeroWire panel is on the same local area network as the camera(s).
1. From your iOS or Android device, open the UltraSync + app and log in to the site as the
installer.
2. Touch Menu
3. Select Cameras under the Settings Selector.
4. Click Scan for New Cameras. "Scanning..." will appear on the button, please wait for
the message to disappear.
5. Make sure the MAC ID that is automatically populated in the MAC Address field
matches the MAC Address printed on the underside surface of the camera.
6. Click Save.
Note: The camera may take up to 3 minutes to finalize the association with ZeroWire and
display on the Cameras screen of the app.
7. Congratulations! You have now added the camera to your ZeroWire system!
Programming event triggered camera clips
Cameras can be programmed to automatically record when selected events occur. This is
achieved by creating a "Scene".
Note: Ensure you can view the live stream from the camera before continuing.
76
then Settings.
MAC: 28:57:BE:2F:0A:5D