Event History - Interlogix XTI-5 Installation Manual

Event history

To view event history:
From the Status & Settings screen, press SHOW next to Event History. The
Event History screen displays a history of all events recorded by the XTi system.
Note: If a # appears in the Event History list, the event was not sent to the central
station.
Direct bypass
To direct bypass a sensor:
1. From the Status & Settings screen, press SELECT next to Direct Bypass.
2. Enter the master code (see Table 10 on page 35).
3. Next to the sensor name, select Bypass to bypass the selected sensor, or Not
bypassed to not bypass the selected sensor.
Panel status
To listen to the panel status:
From the Status & Settings screen, press LISTEN next to Panel Status. The
panel will announce the current status.
To clear the panel status:
From the Status & Settings screen, press CLEAR next to Panel Status.
Lights
To control lights programmed into the system:
1. From the Status & Settings screen, press CONTROL next to Lights.
Note: If no lights are programmed into the system, the following screen will
appear:
28 Simon XTi-5 Installation Manual Contents