Disconnecting From The Media Server - Avaya S8500 Installing And Configuring

Chapter 4: Media server configuration
6. Click Continue.
7. Complete the following information for Ethernet 2:
IP address
●
Gateway
●
Subnet mask
●
Speed
●
8. Verify with the network administrator that the LAN hardware supports 802.1q priority
tagging. If supported, select VLAN 802.1q priority tagging.
9. Click Change. The system displays the status of the configuration update.
When the update is complete, the system displays the following message:
Successfully configured ethernet interfaces.

Disconnecting from the media server

Unplug the cross-over cable from the Services port on the back of the media server.
48
Installing and Configuring the Avaya S8500 Media Server February 2007