Configure The P2P Download Settings - ZyXEL Communications NAS326 User Manual

The following table describes the labels in this screen.
Table 134 Download Service > Download Service > Preferences > General Settings
LABEL
Put incomplete
downloads in/
Move completed
downloads to
Download Period
Control
Enable Download
Period Control
Apply
Reset
Cancel

14.3.3 Configure the P2P Download Settings

Click Download Service > Download Service > Preferences > P2P download to open the following
screen. Use this screen to configure P2P download settings.
Chapter 14 Download Service
DESCRIPTION
Set the default folder location where you "Put incomplete downloads in" and "Move
complete downloads to":
• Share - Select the share from the list.
• Path - Type the folder location in the share directly or click Browse to open the following
screen and navigate to the file's location.
• Current Location - This is the location of the selected folder.
• Folder Name - Enter a new folder name and click
• Type - This identifies the item as a file or folder.
• Name - This is the name of the folder/file.
Select a folder. If you don't select a folder, a forward slash (/) displays in the Path field. All
contents within the specified share are automatically selected.
Click Apply to save your settings and Cancel to close the screen.P2P download jobs are
stored in /*/incoming (where '*' is a folder that you have set.)
• HTTP/FTP jobs are stored in /* (where '*' is a folder that you have set.)
• All jobs triggered by RSS channels create the subfolder in /* using the channel name
where it store all files downloaded from that channel (where '*' is a folder that you have
set.)
This feature sets the NAS to download files only within a specified time period.
Use the check box to turn the download period control on or off.
Specify the time period for the NAS to download files.
Note: If you also configured the Power On/Off Schedule feature in the Control Panel
> Maintenance > Power > Power Management screen, make sure your active
download period does not conflict with the power-off period.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to return to the previous screen without saving.
NAS Series User's Guide
238
to create it.