Configure Web Configurator - ZyXEL Communications NAS326 User Manual

Figure 109 Control Panel > Network > TCP/IP > Network Interface > PPPoE
The following table describes the labels in this screen.
Table 79 Control Panel > Network > TCP/IP > Network Interface > PPPoE
LABEL
Enable PPPoE to
directly connect
to the Internet.
Username
Password
Show password
Apply
Cancel

8.4.3 Configure Web Configurator

Click Control Panel > Network > TCP/IP > Web Configurator to configure the port number of HTTP and
HTTPs.
Chapter 8 Control Panel: Network
DESCRIPTION
Select or clear this field to enable or disable PPPoE.
Enter the username exactly as your ISP assigned. If assigned a name in the form user@domain
where domain identifies a service name, then enter both components exactly as given.
Enter the password associated with the username above.
Select this field to reveal the password hidden behind asterisks or clear this field to hide the
password.
Click this to save your changes.
Click this to return to the previous screen without saving.
NAS Series User's Guide
137