How To Copy Files - ZyXEL Communications NAS326 User Manual

Table 157 Backup Planner > Copy/Sync Button > Sync Settings (continued)
LABEL
Backup Files to be
Replaced or
Removed
Backup Target
Apply
Reset

16.4.3 How to Copy Files

You can copy files from a USB device to the NAS or from the NAS to a USB device. Simply press and
release the COPY/SYNC button to start copying files. See
configuring the copy settings.
The following figure illustrates how copying files works when you copy files from a USB device to the NAS.
The same concept applies when you copy files from the NAS to a USB device.
Figure 236 Copying Files Example
Before Copy
After Copy
Both storage devices contain file A.
• A copy of files A and B from the USB device is transferred to the NAS.
• File A from the USB device replaces file A on the NAS.
Chapter 16 Backup Planner
DESCRIPTION
Select this option to save the files that will be replaced by the source files.
Select a share in which to save the backup files.
Note: The NAS will not create a new folder to store the backup files. It is
recommended to create a specific share (such as "backup") for backup
purposes.
Click this to save your changes.
The configuration file is saved on the USB device.
Click this to restore your previously saved settings.
USB
A B
USB
A B
NAS Series User's Guide
Section 16.4 on page 282
NAS
C
A
NAS
C
A
B
284
for details about