Iscsi Targets Screens - ZyXEL Communications NAS326 User Manual

Figure 68 Creating a New LUN: Summary
The following table describes the labels in these screens.
Table 39 Create a New LUN: Summary
LABEL
Name
Location
Capacity
Allocation Mode
Write Back
Back
Apply
Cancel

5.4.2 iSCSI Targets Screens

The iSCSI target refers to the storage resource that is actually attached to the iSCSI storage device. The
initiator can manage the assigned disk volume on the iSCSI target over the Internet as if it was the
initiator's internal storage volume.
iSCSI Targets allows you to create, edit, and delete an iSCSI target and map a target to an existing LUN.
Click Storage Manager > iSCSI > iSCSI Targets to show the following screen.
Chapter 5 Storage Manager
DESCRIPTION
Displays the name of the LUN.
Displays the name of the volume the LUN is located in.
Displays the size of the LUN.
Displays the allocation method the LUN applies.
Displays whether the Write Back feature is enabled or disabled.
Click Back to go to the previous step.
Click Apply to save the settings.
Click Cancel to close the screen without saving any settings.
NAS Series User's Guide
85