Leds - ZyXEL Communications NAS326 User Manual

Figure 1 Example of the NAS in a Home Network
B
Above is the NAS in a home network. Users back up and share data on the NAS. The media player (A)
plays the NAS's media files on the TV. A USB hard drive (B) provides extra storage space and files are
copied directly from the USB mass storage device to the NAS.
Place the NAS behind a firewall and/or IDP (Intrusion Detection and Prevention) device to protect it
from attacks from the Internet.
Refer to the Quick Start Guide for hardware connections and how to install and remove hard drives from
the disk trays.
Note: Turn off and disconnect the NAS before you install or remove the internal hard disk or
disks.

1.2 LEDs

This table describes the NAS's LEDs.
Table 2 LEDs
LED COLOR
POWER White
SYSTEM White
Red
Chapter 1 Get to Know Your NAS
A
NAS
STATUS DESCRIPTION
On The NAS is turned on and receiving power, or in the process of starting up.
Off The NAS is turned off.
On The NAS has fully started and is operating normally.
Blinking The NAS is starting up or upgrading the firmware.
Note: Do not turn off the NAS while it is upgrading the firmware or you
may render it unusable.
On The NAS has a system error.
NAS Series User's Guide
13