Email Setting - ZyXEL Communications NAS326 User Manual

• Use the Syslog Server Setting screen
select the categories to include in the log report.

11.4.2 Email Setting

You can enable and configure e-mail alerts from the NAS. In the Log Report Configuration screen, click
the Email Setting tab to open the following screen.
Figure 152 Control Panel > Service > Maintenance > Log > Report Config: Email Setting
The following table describes the labels in this screen.
Table 108 Control Panel > Service > Maintenance > Log > Report Config: Email Setting
LABEL
Enable Log Email
Email To
Email From
Email Server
Email Format
Use SMTP
Authentication
User
Password
Password
(Confirm)
After apply settings,
send a test email
Apply
Cancel
Chapter 11 Control Panel: Maintenance
(Section 11.4.4 on page
DESCRIPTION
Click this to have the NAS e-mail log alerts to your e-mail account.
Enter the e-mail address where you want to receive the log alerts.
Enter the e-mail address the NAS uses in the From field of the e-mail header for its log alerts.
Enter the e-mail server address the NAS uses to send e-mail alerts,
Select the e-mail format you want the NAS to use in its e-mail alerts.
Click this if the e-mail server you want the NAS to use for its e-mail alerts requires a username
and password.
Enter the username for the e-mail server.
Enter the password for the e-mail server.
Re-enter the password to confirm it.
Click this to have the NAS send a test e-mail to the settings you have entered.
Click this to save your changes.
Click this to return to the previous screen without saving.
NAS Series User's Guide
184
185) to enable the syslog server and