Media Server Functions - ZyXEL Communications NAS326 User Manual

20.13 Media Server Functions

I set the media server function to publish a folder, but some of the files in the folder do not display
in the list on the media client.
Files with formats that are not supported on the media server may not display in the list. See
the file formats that the media server supports.
I published a folder with the media server function, but the media client does not play some of
the files (or does not play them properly).
Files with formats that are not supported on the media server may not display in the list. See
1
the file formats that the media server supports.
If you are using media client software, you may need to install codecs on your computer. Since the
2
media client software uses your computer's installed codecs, files do not play if the required codec is
not installed on your computer.
The media client may not support the file's format.
3
iTunes does not display the names of all the music files I just put on the NAS.
Make sure the files are a format supported by iTunes. See
1
Go to Control Panel > Service > iTunes Server. Make sure the share containing the music files is published
2
and the iTunes server option is enabled.
If an iTunes client is connected, the NAS's iTunes server function scans the published media server folders
3
for files every three minutes. Leave iTunes connected to the NAS for three minutes. Then use the NAS's
eject button (as shown next) to disconnect.
Chapter 20 Troubleshooting
NAS Series User's Guide
329
page 335.
page 335 for
page 335 for