Configure Network Diagnosis - ZyXEL Communications NAS326 User Manual

Figure 110 Control Panel > Network > TCP/IP > Web Configurator
The following table describes the labels in this screen.
Table 80 Control Panel > Network > TCP/IP > Web Configurator
LABEL
HTTP connection
Port Number
Enable HTTPS
connection
Port Number
Allow only
HTTPS
connection
Apply
Reset

8.4.4 Configure Network Diagnosis

Click Control Panel > Network > TCP/IP > Network Diagnosis to test the network connection to a
particular IP address or domain name.
Chapter 8 Control Panel: Network
DESCRIPTION
Specify the port number of HTTP connection.
Note: The port number 8082 is reserved for media streaming.
Select or clear this field to enable or disable HTTPS connection.
Specify the port number of HTTPS connection.
Select this field to allow connection to the Web Configurator via HTTPS only. Clear this field to
allow connection to the Web Configurator via both HTTP and HTTPS.
Click this to save your changes.
Click this to restore your previously saved settings.
NAS Series User's Guide
138