Connecting To A Component Video Source - Epson BrightLink 675Wi+ User Manual

3. Connect the other end of the cable to the projector's HDMI 1/MHL port.
/DCMS/Publications/Projectors/Source/Images/Connections/PL670_BL695Wi/connect_video_mhl_bl695
wi.jpg
Note: The projector converts the digital audio signal sent from your video source into a mono analog
signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
Parent topic:
DCMS/Publications/Projectors/Source/Setup/Tasks/connecting_video_component_vga.xml

Connecting to a Component Video Source

If your video source has component video ports, you can connect it to the projector using an optional
component-to-VGA video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors
to your component video cable.
Connecting to Video Sources
45