Transferring Settings From A Usb Flash Drive - Epson BrightLink 675Wi+ User Manual

1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Insert the flash drive into the USB-A port.
/DCMS/Publications/Projectors/Source/Images/Connections/PL670_BL695Wi/connect_usb_quick_wirele
ss_bl695w.jpg
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Esc button on the control panel or remote control as you connect the power cord
to the projector's power inlet.
4. When the power, Status, Lamp, and Temp lights turn on, release the Esc button.
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Parent topic:
DCMS/Publications/Projectors/Source/Adjustments/Tasks/batch_settings_transfer_usb.xml

Transferring Settings from a USB Flash Drive

After saving projector settings to a USB flash drive, you can transfer them to another projector of the
same model.
Copying Menu Settings Between Projectors
151