Table of Contents
Advertisement
7. Select the Wired LAN menu and press Enter.
/DCMS/Publications/Projectors/Source/Images/Menus/PL670_685W/menu_network_wiredlan_pl685w.jpg
8. If necessary, select IP Settings and press Enter.
9. Select your IP Settings as necessary:
• If your network assigns addresses automatically, turn on the DHCP setting.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, and Gateway Address as needed.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press Enter. Or, press and hold the Num button
on the remote control while entering the desired numbers.
10. To prevent display of the IP address on the standby screen, turn off IP Address Display.
11. When you finish selecting settings, select Complete and follow the on-screen instructions to save
your settings and exit the menus.
Parent topic:
Wired Network Projection
Related references
Projector Network Settings - Network Menu
64
Advertisement
Table of Contents
