Table of Contents
Advertisement
Setting
Power Consumption
Light Optimizer
Sleep Mode
Sleep Mode Timer
A/V Mute Timer
Standby Mode
Options
Auto
Normal
ECO
ECO2 (BrightLink
685Wi+/695Wi+ only)
On
Off
On
Off
1 to 30 minutes
On
Off
Communication On
Communication Off
228
Description
Selects the brightness mode of
the projector lamp
Auto: allows the projector to
sense the optimum lamp
brightness and adjust the lamp
brightness accordingly
Normal: sets maximum lamp
brightness
ECO: reduces lamp brightness
and fan noise, and saves power
and lamp life
ECO2: reduces fan noise less
than ECO
When Power Consumption is
set to Normal, the lamp
brightness is adjusted based on
the projected image; you can set
this option for each color mode
Automatically places the
projector in standby mode after
an interval of inactivity
Sets the interval for Sleep Mode
Automatically turns off the
projector after 30 minutes if
A/V Mute is enabled
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
Advertisement
Table of Contents
