Table of Contents
Advertisement
3. Select Manual Calibration and press Enter.
/DCMS/Publications/Projectors/Source/Images/Menus/PL470_BL485wi/calibration_manual_bl475wi_485
wi.jpg
4. Adjust the image focus, if necessary.
5. Press Enter to select Yes.
A flashing green circle appears in the upper left corner of your projected image.
6. Touch the center of the circle with the tip of the pen.
The circle disappears, and you see another circle below the first one.
/DCMS/Publications/Projectors/Source/Images/Interactive/BL575Wi_585Wi_595Wi/calibrate_dot_start_p
osition_bl575wi_595wi.jpg
171
Advertisement
Table of Contents
