Table of Contents
Advertisement
Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is
especially dangerous for children.
If you do not see a projected image right away, try the following:
• Turn on the connected computer or video device.
• Insert a DVD or other video media and press the play button, if necessary.
• Press the Source Search button on the projector or remote control to detect the video source.
• If the Home screen is displayed, select the source you want to project.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
DCMS/Publications/Projectors/Source/Basic_Use/Tasks/projector_turn_off_blue_power_light.xml
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Note: When using the A/V Mute feature, the projector lamp is still on. To turn off the lamp, turn off the
projector.
1. Press the power button on the projector or the remote control.
Using Basic Projector Features
90
Advertisement
Table of Contents
