Table of Contents
Advertisement
Note: For the most accurate calibration, make sure you touch the center of the circle.
/DCMS/Publications/Projectors/Source/Images/Interactive/BL575Wi_585Wi_595Wi/calibrate_dot_center_
warning_bl575wi_bl595wi.jpg
Note: Make sure you are not blocking the signal between the pen and the interactive receiver (next
to the projection window on the projector).
7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next
circle appears at the top of a new column.
/DCMS/Publications/Projectors/Source/Images/Icons/BL475wi_480i_485wi/calibrate_dot_up_down.jpg
Note: If you make a mistake, press the Esc button on the remote control to go back to the previous
circle. To restart the calibration process, press and hold the Esc button for 2 seconds.
172
Advertisement
Table of Contents
