Table of Contents
Advertisement
Event ID code
Cause and solution
0432
The network software did not start. Turn the projector off and then on again.
0435
0434
Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
0481
0482
0485
0433
Cannot display the transferred images. Restart the network software.
0483
The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
04FE
0484
Communication with computer was disconnected. Restart the network software.
0479
A projector system error has occurred. Turn the projector off and then on again.
04FF
0891
Cannot find the SSID (network name). Make sure your computer and projector are
connected to your access point's current SSID.
0892
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
0893
The TKIP/AES encryption type does not match. Make sure the wireless network
security settings are correct.
0894
Communication with unauthorized access point was disconnected. Contact your
network administrator.
0898
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
0899
A communication error has occurred. Try restarting the network software and
restarting your projector. If that does not solve the problem, contact Epson for help.
Parent topic:
Projector Information Display - Info Menu
231
Advertisement
Table of Contents
