Setting The Remote Control Id - Epson BrightLink 675Wi+ User Manual

4. Select Projector ID and press Enter.
/DCMS/Publications/Projectors/Source/Images/Adjustments/proj_id_menu.jpg
5. Press the arrow buttons on the remote control to select the identification number you want to use for
the projector. Then press Enter.
Repeat these steps for all the other projectors you want to operate from one remote control.
Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button
to temporarily display the projector's ID on the screen.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
DCMS/Publications/Projectors/Source/Adjustments/Tasks/Multi_Projector_Tasks/multi_projector_setting_remote_id.
xml

Setting the Remote Control ID

The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to
set the remote control to operate only a particular projector, you need to set the remote control's ID to
match the projector's ID.
Note: You must set the remote control ID to match the projector ID each time you turn on the projector
you have set it to control.
Using Multiple Projectors (DuoLink)
127