Projection Distance; Removing And Attaching The Cable Cover - Epson BrightLink 675Wi+ User Manual

Front projection from a table or portable cart (BrightLink 675Wi+/685Wi+)
/DCMS/Publications/Projectors/Source/Images/Setup/PL470_BL485wi/place_proj_front_pl470_bl485wi.jpg
Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an
angle.
If you project from a table or portable cart, be sure to select the correct Projection option in the
projector's menu system.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
DCMS/Publications/Projectors/Source/Setup/Reference/projection_distance_pl670_685w.xml

Projection Distance

The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Refer to the tables in the Installation Guide included with your mount to determine approximately how far
to place the projector from the screen based on the size of the projected image. (Conversion figures may
have been rounded up or down.) You can also use the Projection Distance Calculator
Parent topic:
DCMS/Publications/Projectors/Source/Setup/Tasks/removing_attaching_cable_cover.xml

Removing and Attaching the Cable Cover

Before you can connect equipment to your projector, you need to remove the cable cover.
Projector Placement
Projector Placement
35
here .