2. To move the main toolbar to the other side of the screen, tap the
the screen.
Note: You can use the pen or your finger (BrightLink 695Wi+) to move the arrow icon up or down to
reposition the toolbar.
3. To close the main toolbar, select the
Note: If you want to hide the toolbar automatically after drawing, select the
the toolbar.
4. To show or hide the projector control toolbar, select the
Note: You can also show or hide the projector control toolbar by setting the Extended > Display >
Projector Control setting to On or Off.
Parent topic:
DCMS/Publications/Projectors/Source/Interactive/Tasks/annotation_mode_using_touch.xml
Drawing on a Projected Image (Built-in Annotation Mode)
You can project from a computer, tablet, video device, or other source and annotate over your projected
content using the interactive pens or your finger (BrightLink 695Wi+). You can use one pen, both pens at
the same time, or a combination of pens and finger touch (BrightLink 695Wi+).
1. Project an image from a connected device.
2. Hover near or tap the board or projected image with the interactive pen or your finger (BrightLink
695Wi+). Tap the
Interactive Modes
built-in annotation mode icon on the toolbar.
icon at the bottom of the toolbar.
or
158
arrow on the opposite side of
icon at the bottom of
arrow.