Table of Contents
Advertisement
• To turn on the pen, move the pen.
Note: If you press the function button, the battery light flashes briefly, then turns off. If the battery is
low, the battery light flashes continuously.
• For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the
black section near the tip of the pen.
/DCMS/Publications/Projectors/Source/Images/Interactive/BL695Wi_696Ui/pen_angle_bl695wi.jpg
• To write or draw on the projection surface in built-in annotation mode or built-in whiteboard mode, do
the following:
/DCMS/Publications/Projectors/Source/Images/Interactive/BL695Wi_696Ui/pen_using_bl695wi.jpg
• To select a projected item, such as an icon, tap the projection surface with the pen tip.
• To draw on the projected screen, tap the projection surface with the pen and drag it as necessary.
• To move the pointer, hover over the surface without touching it.
• To switch the pen from drawing tool to eraser, press the button on the side.
165
Advertisement
Table of Contents
