Solutions When The Image Is Not Rectangular; Solutions When The Image Contains Noise Or Static - Epson BrightLink 675Wi+ User Manual

• Make sure you selected the correct Projection setting.
• Try adjusting the image position using the Image Shift setting.
Parent topic:
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
DCMS/Publications/Projectors/Source/Troubleshooting/Reference/problem_image_shape_wall_mount.xml

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:
• If the projector is not mounted on the wall or ceiling, place it directly in front of the center of the screen,
facing it squarely, if possible.
• Use the Image Shift setting to adjust the image position, rather than moving the projector.
• Adjust the image shape using the Geometry Correction menu settings.
Note: Adjusting Quick Corner, H/V-Keystone, and Arc Correction settings may affect focus and
pen calibration.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Related tasks
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Correcting Image Shape with Arc Correction
Adjusting the Image Position
DCMS/Publications/Projectors/Source/Troubleshooting/Reference/problem_image_noise.xml

Solutions When the Image Contains Noise or Static

If the projected image seems to contain electronic interference (noise) or static, try the following
solutions:
• Check the cables connecting your computer or video source to the projector. They should be:
• Separated from the power cord to prevent interference
Solving Image or Sound Problems
Solving Image or Sound Problems
270