Using Finger Touch Operations - Epson BrightLink 675Wi+ User Manual

Note: Make sure you are not blocking the signal between your finger and the interactive receiver
(next to the projection window on the projector).
8. Touch the center of the next circle with your finger and continue until all of the circles disappear.
When you get to the bottom of a column, the next circle appears at the top of a new column.
/DCMS/Publications/Projectors/Source/Images/Interactive/BLP1420Wi_1430Wi/EIF_004.jpg
Note: If you make a mistake, press the Esc button on the remote control to go back to the previous
circle. To restart the calibration process, press and hold the Esc button for 2 seconds.
9. If the cursor location and your finger position do not match, repeat these steps to calibrate again.
Parent topic:
Related tasks
Focusing the Image
Calibrating Automatically
Calibrating Manually
DCMS/Publications/Projectors/Source/Interactive/Tasks/finger_touch_using_bl595wi_plus.xml

Using Finger Touch Operations

You can use your finger to interact with the projected screen, just as you would use an interactive pen
(BrightLink 695Wi+). You can use either a pen or your finger, or use both at the same time.
Using Finger Touch Interactivity
179