Table of Contents
Advertisement
1. Press and hold down the Num button on the remote control while you enter the password using the
numeric buttons.
/DCMS/Publications/Projectors/Source/Images/Adjustments/PL670_BL695Wi/remote_control_number_pl
685w_bl695wi.jpg
The password screen closes.
2. If the password is incorrect, the following may happen:
• You see a "wrong password" message and a prompt to try again. Enter the correct password to
proceed.
• If you enter an incorrect password three times in succession, you see a message telling you that
the projector is locked. After the message is displayed for 5 minutes, the projector enters standby
mode. Unplug the projector, plug in the power cord, and turn on the projector. You see a prompt to
enter the password.
• If you continue to enter an incorrect password many times in succession, the projector displays a
request code and a message to contact Epson Support. Do not attempt to enter the password
again. When you contact Epson Support, provide the displayed request code and proof of
ownership for assistance in unlocking the projector.
Parent topic:
Related tasks
Selecting Password Security Types
DCMS/Publications/Projectors/Source/Adjustments/Tasks/security_creating_user_logo_screen.xml
Saving a User's Logo Image to Display
You can transfer an image to the projector and then display it whenever the projector turns on. You can
also display the image when the projector is not receiving an input signal or when you temporarily stop
projection (using the A/V Mute feature). This transferred image is called the User's Logo screen.
Password Security Types
144
Advertisement
Table of Contents
