Connecting To Video Sources; Connecting To A Component-To-Vga Video Source - Epson PowerLite X11H User Manual

Parent topic:

Connecting to Video Sources

Follow the instructions in these sections to connect video devices to the projector.

Connecting to a Component-to-VGA Video Source

Connecting to a Composite Video Source
Connecting to an S-Video Video Source
Connecting to a Video Source for Sound
Parent topic:
Connecting to a Component-to-VGA Video Source
If your video source has component video ports, you can connect it to the projector using a component-
to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along
with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors
to your component video cable.
2. Connect the VGA connector to the projector's Computer port.
PowerLite X11
PowerLite X11H/X14H
Connecting to Computer Sources
Projector Connections
31