Using The Projector On A Network; Wired Network Projection; Connecting To A Wired Network - Epson BrightLink 675Wi+ User Manual

DCMS/Publications/Projectors/Source/Network/Container_Topics/network_using_container.xml

Using the Projector on a Network

Follow the instructions in these sections to set up your projector for use on a network.
Note: The interactive features may be slower over a network connection than over a USB connection.

Wired Network Projection

Wireless Network Projection
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Crestron RoomView Support
DCMS/Publications/Projectors/Source/Network/Concepts/wired_network_projection_intro.xml
Wired Network Projection
You can project through a wired network. To do this, you connect the projector to your network, and then
set up your projector and computer for network projection.
After connecting and setting up the projector as described here, install the network software from the
included CD or download the software and manuals as necessary.
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point,
you can connect to the projector wirelessly through the access point using the Epson network software.

Connecting to a Wired Network

Selecting Wired Network Settings
Parent topic:
Related references
Additional Projector Software and Manuals
Projector Network Settings - Network Menu
DCMS/Publications/Projectors/Source/Network/Tasks/connecting_network_cable.xml
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
Using the Projector on a Network
60