Bosch MUC6...RU Instruction Manual page 20

en Customised setting options
Setting the steam pressure
For preparation programmes with pre-set
steam pressure function, the temperature
can be selected via "low steam pressure"
[ K ] or "high steam pressure" [ L ].
1. In function selection mode, keep
pressing button D until the desired
preparation programme is selected.
The corresponding LED lights up in the
control panel and the pre-configured prepa-
ration time for this preparation programme
is shown. The indicator "low steam pres-
sure" [ K ] or "high steam pressure" [ L ]
additionally lights up.
Note: If [ K ] or [ L ] does not light up, the
steam pressure function is not available for
the selected programme.
2. Press button L to switch between [ K ]
and [ L ].
3. If the desired steam pressure is
displayed, press button G.
The preparation programme is started with
the set steam pressure function.
Note: These settings are not saved. If this
preparation programme is selected again,
the set steam pressure function will be
shown in the display once more.
мой режим – my mode (manual)
Quick setting mode for customising the
steam pressure function, preparation time
and temperature setting for a cooking
process.
In function selection mode, button B and
the indicator [ мой режим ] (my mode) are
permanently lit. Button G flashes. "00:00"
is shown in the display.
Note: In order to switch on the steam
pressure function, the pressure locking
handle must be closed (N). The indicator
[ K ] lights up.
Setting the preparation time
1. Press button F once.
"00:00" flashes in the display.
2. Keep pressing button F until the desired
preparation time is displayed.
20
MUC6-8_RU_8001018000.indb 20
Setting the preparation temperature or
steam pressure
3. Without steam pressure function:
The pressure locking handle must be
opened (M). Press button C once.
"0000" flashes in the display. Button C
must then be pressed repeatedly until
the desired preparation temperature is
displayed.
or
With steam pressure function: The
pressure locking handle must be
closed (N). Press button L to switch
between [ K ] and [ L ].
4. Press button G to start with the
selected settings.
The appliance heats up the pan until the
target temperature or the steam pressure is
reached.
Once the target temperature or steam
pressure is reached, the lines go out and
the next preparation time is shown in the
display. The preparation process starts
automatically.
рецепт 1 / рецепт 2
(recipe 1 / recipe 2) –
saving personal preparation
programmes
Personal preparation programmes with
customised time and temperature and
steam pressure function can be saved
under the memory locations [ рецепт 1 ]
(recipe 1) and [ рецепт 2 ] (recipe 2).
Notes:
■ If you have not previously saved any
personal preparation programmes, the
display does not show any values.
■ In order to switch on the steam pressure
function, the pressure locking handle
must be closed (N).
1. In function selection mode, press
button D once.
The LED [ рецепт 1 ] (recipe 1) lights up.
The pre-configured preparation time is
shown in the display.
07.03.2016 10:38:02