Bosch MUC6...RU Instruction Manual page 15

Note: If [ K ] or [ L ] does not light up, the
steam pressure function is not available for
the selected programme.
6. Press button G to start the preparation
programme.
The appliance heats up the pan until the
pre-configured steam pressure is reached.
During the heating phase, lines that light up
in a clockwise direction appear in the display.
Once the pre-configured steam pressure
is reached, the lines go out and the
preparation time is shown in the display.
The preparation process starts automati-
cally. The preparation time counts down.
Once the preparation time is completed,
an audible signal sounds, the display
flashes and shows "P". Steam automatically
escapes from the appliance intermittently
to reduce the pressure in the appliance
interior.
W Risk of scalding!
Never bend over the appliance while steam
is escaping from it!
When the pressure in the appliance interior
has been completely reduced, the indicator
[ готово ] (finished) and button G light
up or the keep warm function is activated.
X "Keep warm function" see page 17
A rectangle lights up in the display (dotted
lines). The preparation programme is
completed.
MUC6-8_RU_8001018000.indb 15
7. Open the appliance. Open the pressure
locking handle for this purpose (M)
and press the opening button on the
basic appliance.
Notes:
■ Never use force to open the appliance!
■ Always shake the appliance gently
before opening in order to dissolve any
steam bubbles that may have formed in
the food and to prevent blocking.
■ The pressure locking handle can be easily
opened when the steam has completely
escaped from the appliance interior and
the appliance is fully depressurised.
■ Automatic steam release can take some
time. In order to accelerate the process
or if the appliance is not completely
depressurised, the steam can also be
released manually. X "Release steam
manually" see page 15
8. Serve the prepared meal.
W Risk of scalding!
■ The pan and any inserts that are used
may be very hot. Always use suitable
handles or oven gloves.
Caution!
Condensation is formed during cooking.
Empty the condensation tank regularly.
Notes:
■ The preparation programme can be
stopped at any time using button H.
The appliance subsequently switches
to function selection mode. Before the
appliance can be opened, the steam in
the appliance interior must be released
manually. X "Release steam manually"
see page 15
■ Certain preparation programmes
consist of several preparation steps.
X "Multiple preparation steps" see
page 17
Release steam manually
Steam can also be released manually in the
following cases:
■ If automatic steam release is to be
accelerated at the end of a preparation
programme.
Preparation en
15
07.03.2016 10:38:00