Before Using For The First Time - Bosch MUC6...RU Instruction Manual

en Before using for the fi rst time
c Preparation steps /
programme progress
Display of the individual preparation
steps and the programme progress. In
the case of multiple preparation steps
(e.g. the ingredients are added after
heating the deep frying oil), these are
visually indicated by the illumination of
LEDs 1, 2, 3 or 4. An audible signal also
sounds if a subsequent preparation step
is required.
d готово (fi nished)
This indicates that the meal is ready.
The display (a) fl ashes and shows
"00:00". An audible signal also sounds.
e подогрев (keep warm)
Indicates that the keep warm function is
switched on at the end of a preparation
programme. A rectangle lights up in the
display (dotted line).
f Steam pressure function
[ K ] shows that low steam pressure
(105°C) is selected.
[ L ] shows that high steam pressure
(115°C) is selected. X "Preparation with
steam pressure" see page 13
g Display of the pre-confi gured
preparation time
The pre-confi gured preparation time
[ средняя ] (medium) for a preparation
programme can be shortened
[ короткая ] or lengthened [ длинная ]
using button E. The corresponding
indicator lights up.
h List of preparation programmes
There are 16 pre-confi gured preparation
programmes available. The individual
preparation programmes are displayed
one after another by repeatedly pressing
button D. The corresponding LED lights
up in the control panel.
i рецепт 1&2 – recipe 1&2
Memory locations to store individual
preparation programmes with steam
pressure function, preparation time and
temperature.
8
MUC6-8_RU_8001018000.indb 8
j мой режим – my mode
Quick setting mode for customising the
steam pressure function, preparation
time and temperature setting for a
cooking process.
Before using for the
fi rst time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
connected to the power outlet. To do this,
perform the following steps:
1. Remove the appliance and all accessory
parts from the packaging.
2. Use the carrying handle to lift the
appliance. Swing the carrying handle
upwards accordingly.
Caution!
You should only use the carrying handle to
ensure safe transport of the appliance.
3. Place the appliance on a stable, level
and smooth work surface.
Caution!
There must be no sensitive surfaces and
appliances above and behind the appliance
that may be damaged by the temperature
development and the escaping steam.
4. Remove the steam outlet
Grip the steam outlet at the rear and pull
up and off.
07.03.2016 10:37:54