Edge Feature - Panasonic DP-MB500 series Operating Instructions Manual

7.3.9 Edge feature

7.3.9 Edge feature
You can set the unit not to copy the outer edges of the document without reducing the copied documents to fit
the recording paper. This is useful for copying documents with register marks or dirty edges.
1.
Set the original.
2.
For 2-line LCD models (
1. /COPY
2. Select "ON".
3. Select "LONG EDGE".
4. Enter the long edge width using the dial keypad.
5. Select "SHORT EDGE".
6. Enter the short edge width using the dial keypad.
For touch panel models (
1. Display "Settings" screen (page 86).
2.
"EDGE" "ON"
3.
"LONG EDGE"
4.
"SHORT EDGE"
3.
If necessary, enter the number of documents (up to 99).
4.
/START
Note
• After you finish copying, press
• This feature and page layout features cannot be used at the same time (except for N in 1).
• You can hold the previous edge setting (feature #473).
98 Operating Instructions
):
/PAGE LAYOUT (repeatedly): "EDGE"
OK/SET
OK/SET
OK/SET
):
"EDGE"
Enter the long edge.
Enter the short edge.
: /STOP /
OK/SET
OK/SET
"OK"
"OK" "OK"
: to reset this feature.