Table of Contents
Advertisement
2.3 Turning the power ON/OFF
For Germany and Austria only:
Connector pinouts (fax supported models
only) (
)
Socket "To phone line"
1 a2
2
2 —
1
3 La
4 Lb
5 —
6 b2
Connecting the handset
See page 19 if your unit includes a handset.
Important
• Before installing or removing the handset
unit, be sure to turn the power switch OFF.
Using network router/network hub (LAN supported
models only) (
)
• We recommend using network routers/network
hubs under secure network environments. Consult
your network administrator for firewall settings,
etc.
• The warranty does not cover damage due to
security problems or any inconveniences relating
to it.
30
Operating Instructions
3
4
5
6
2.3 Turning the power ON/OFF
Turning the power ON
A
1.
Press the power button (
Turning the power OFF
1.
Press the power button.
OK/SET /
:
• To cancel power OFF, press
• You can also turn the power OFF by pressing
the power button for about 3 seconds.
2.4 Date and time (Fax or LAN
supported models only)
We recommend setting the date and time (feature
#101). The other party will receive your unit's date
and time as the header information.
If you have subscribed to a Caller ID service
(
)
The date and time will automatically set according to
the received caller information (feature #226).
2.5 Configuring the unit to
access the LAN
You can use a computer connected to the LAN for
some features of this unit (printer, scanner, etc.). To
enable these features, you need to set the IP
address, subnet mask, and default gateway in the
unit.
Important
• Consult your network administrator when
setting the IP address, subnet mask, and
default gateway.
2.5.1 Setting up automatically with a DHCP
server
If your network administrator manages the network
with a DHCP (Dynamic Host Configuration Protocol)
server, it will automatically assign an IP (Internet
).
:
/START
/STOP .
Hide quick links:
Advertisement
Table of Contents
