8.4.1 Various settings for sending faxes
8.4.1 Various settings for sending faxes
To select the contrast
Adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are available.
1.
:
/FAX
: Display "CONTRAST" screen (page 105).
2.
Change the contrast.
To select the resolution
1.
:
/FAX
: Display "RESOLUTION" screen (page 105).
2.
Select the resolution.
Note
• If you select "FINE", "SUPER FINE" or "PHOTO" resolution, transmission time will increase.
*1
For 2-line LCD models only. (
To select the duplex setting
You can send 2-sided originals using the automatic document feeder.
1.
:
/DUPLEX
: Display "DUPLEX" screen (page 105).
2.
Select the desired binding of the original.
3.
OK/SET
*1
*1
For 2-line LCD models only. (
8.4.2 Selecting the destination from stored items
Store the desired names and telephone numbers into the address book beforehand (page 62).
Using address book
1.
:
/FAX
: Display "ADDRESS BOOK" screen (page 105).
2.
Select the desired item.
Note
• If the LDAP setting is activated beforehand (page 131), select "LDAP SEARCH" or "ADDRESS BOOK".
OK/SET
*1
For LDAP search, enter the name using the dial keypad (up to 11 characters), then press
OK/SET /
: "OK" to start searching.
*1
For 2-line LCD models only. (
Using the one-touch dial feature (
Using station 1-3:
Press the desired station key.
Using station 4-6:
Press
/LOWER , then press the desired station key.
8.4.3 Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit is receiving a fax or sending a fax from memory.
– Up to 10 reservations when sending
– Up to 11 reservations when receiving
106
Operating Instructions
/QUALITY (repeatedly): "CONTRAST"
: OK/SET /
: "OK"
/QUALITY (repeatedly): "RESOLUTION"
OK/SET
*1
)
)
)
)
: