1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. All in One Printer
  5. DP-C406
  6. Operating instructions manual

Panasonic DP-C406 Operating Instructions Manual

Digital colour imaging systems
Hide thumbs Also See for DP-C406:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Function Manual, Operating Instructions Manual

Operating Instructions

(For Function Parameters)
Digital Colour Imaging Systems
DP-C406 / C306 / C266
Model No.
Before operating this machine, please carefully read this manual
and keep this documentation in a safe place for future reference.
English
(Illustration shows optional accessories that may not be installed on your machine.)

Advertisement

Table of Contents
loading

Related Manuals for Panasonic DP-C406

Summary of Contents for Panasonic DP-C406

  • Page 1: Operating Instructions

    Operating Instructions (For Function Parameters) Digital Colour Imaging Systems DP-C406 / C306 / C266 Model No. Before operating this machine, please carefully read this manual and keep this documentation in a safe place for future reference. English (Illustration shows optional accessories that may not be installed on your machine.)
  • Page 2 Operating Instructions The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manual and keep all manuals for future reference. If you lose the manual, contact the authorised Panasonic dealer. Quick Reference Guide Describes the basic procedures for each function, and introduces various settings for Copy function.
  • Page 3 Conventions Icons The following icons are used in this manual. Icon Description Indicates important information that must be read in detail. Indicates reference information. Notation The following notations are used in this manual. Notation Description For Keys and Buttons Hard buttons on the Control Panel are depicted as **** key, and soft buttons on the Touch Panel Display are depicted as “xxx”.

  • Page 4: Table Of Contents

    Table of Contents Chapter 1 Before Starting Function Setup Outline ......................Function Setup Menu Configuration................Using the Keyboard ......................Basic Operations for Function Setup................... Chapter 2 General Settings General Settings........................General User Mode......................Key Operator Mode......................Example : Dept. Counter Mode ................... Example : Departmental Counter ..................
  • Page 5 LAN RLY XMT Request (Fax Parameter 140) ..............66 Example : Relay Station (LAN Relay).................. 68 Relay XMT (Fax Parameter 142)..................68 Relay XMT Report (Fax Parameter 143)................. 70 Relay XMT Password (User Parameter 40) ..............71 Manager’s Email Addr (User Parameter 30) ..............72 Relay Domain 01 to 10 (User Parameters 45 to 54) ............

  • Page 6: Before Starting

    • The Key Operator Password is required before any change can be made in the Key Operator Mode. For security, the Key Operator is advised to setup and manage the 8-digit password. To set the password, consult with the authorised Panasonic dealer. (The default password is 00000000.) Function Setting...

  • Page 7: Using The Keyboard

    Using the Keyboard Entering Uppercase / Lowercase Entering Numeric Characters and Letters Symbols Select “Caps” to shift the characters Select “Numeric/Symbols” to shift between uppercase/lowercase. numbers/symbols. Ex: When setting “04 LDAP (00 LDAP Ex: When setting “03 EMAIL (00 Email Server)”...

  • Page 8: Basic Operations For Function Setup

    Basic Operations for Function Setup The following procedure is an example of setting up function(s). To select a function, refer to the list of Function Parameters described later. When setting the parameters in the Key Press the Function key. Operator Mode, enter the password (8 digits), and then select “OK”.
  • Page 9 Entering numbers using Select “Close”. Select , and then select “OK”. Ex: When setting “15 Fold Position (A3/ LDR)” in the General Settings (See page Press the Reset key to return the machine to the initial screen of the current active mode.

  • Page 10: Chapter 2 General Settings

    Set whether to display the percentage (%) of Off, On sorting memory used. Departmental Counter Set whether to display departmental counters, limit counters, and total counters. Consult with the authorised Panasonic dealer on how to use this item. No. 5 - 9 Parameter Comments Selective Item...

  • Page 11: Key Operator Mode

    , B5 or 8.5x11 , is selectable for 8x13 , 8.5x13 Tray 1. To change the preset paper size, consult with the authorised Panasonic dealer. Select “Change Type” to change the paper • “Change Type” type. Plain, Glossy, Recycled, Thick...
  • Page 12 Parameter Comments Selective Item Standard Setting Pap. Tray Priority(Col) Set the Paper Tray Priority for colour copy or S>C>B, C>S>B C>S>B print job. • S Optional paper feed unit • C Paper tray of the main unit • B Sheet bypass Copy Output Tray Set an Output Tray for the Copy function.
  • Page 13 Parameter Comments Selective Item Standard Setting Fold Position(A4/LTR- Set the binding margin for booklet copy (A4/ -4.0 to +4.0 mm Letter-R). A4 / Letter-R (8.5x11)
  • Page 14 No. 20 - 39 Parameter Comments Selective Item Standard Setting Date Time Setting Set the date and time. Day, Month, Year, Time Set whether to adjust the date and time Off, On automatically using NTP (Network Time Protocol). When set to “On”, the clock of the machine synchronizes to NTP server at 1:00 AM or when the machine’s power is turned on.
  • Page 15 Setting Dept. Counter Mode Set whether to display departmental counters, limit counters, and total counters. Consult with the authorised Panasonic dealer on how to use this item. User Authentication Set whether to use the User Authentication Copy, Fax, Print, Scan function.
  • Page 16 No. 60 - 79 Parameter Comments Selective Item Standard Setting Auto Tone Adjust If the coloured image tone has deviated, set the Stop, Start Stop automatic tone adjustment. <Procedure> 1. Execute this mode to print the calibration sheet. 2. Place the calibration sheet on the Platen Glass and execute this mode again.
  • Page 17 No. 80 - 89 Parameter Comments Selective Item Standard Setting Key Operator Set the 8-digit Key Operator Password. Up to 8 characters 00000000 Password Address Book Group Set the Address Book Group ID. 0 to 99 Customised Screen Select the image to display on the Touch Panel Image 1, Image 2, Image Image 1 Display.

  • Page 18: Example : Dept. Counter Mode

    To use “Dept. Counter Mode”, a special service setting is required. Contact your authorised Panasonic dealer. When the Departmental Counter function is enabled, the password (department code) entry screen appears on the Touch Panel Display.
  • Page 19 Clearing the Total Counter with the “Total Enter the password (8 digits), and then Counter” button select “OK”. You can clear the total departmental counter. Refer to Clearing the Total Counter (see page 21). Changing the Departmental Count with the “Departmental Counter” button You can change the departmental counter.
  • Page 20 Registering/Changing the Password Enter the department name (up to 25 (Department Code) characters), and then select “OK”. Select “Identification Code”. Select “OK”. Select the department number to register/change the password (department code), and then select “Input”. Select “Close”. Enter the department code (up to 8 digits), and then select “OK”.
  • Page 21 Clearing the Total Counter Select “Close”. If the total counter is not displayed, select “Total Counter”. Press the Reset key to return the machine to the initial screen of the current active mode. Select “Clear”. Select “Yes” to clear the counter. Select “OK”.
  • Page 22 Printing a Departmental List or Report Select “Close”. Select “Print List”. Press the Reset key to return the machine to the initial screen of the current active Select the list or report you want to mode. print, and then select “OK”. Printing of the selected list or report starts.
  • Page 23 Changing the Departmental Counter Select “Input”, and enter a count (up to 7 digits) with the Keypad, and then Select “Departmental Counter”. select “OK”. Select the department number to change the departmental count of, and then select “Input”. Select “Close”. Select “Close”.
  • Page 24 Changing the Maximum Prints Select “Close”. Select “Maximum Prints”. Press the Reset key to return the machine to the initial screen of the current active Select the department number to mode. change the departmental limit of, and then select “Input”. Select the count limit you want to change.
  • Page 25 Select “Input”, and enter a new limit Select “Close”. (up to 7 digits) with the Keypad, and then select “OK”. Press the Reset key to return the machine to the initial screen of the current active mode. If you enter “9999999”, the copy count limit becomes infinite.

  • Page 26: Example : Departmental Counter

    Example : Departmental Counter When “Dept. Counter Mode” is selected, you can display your selected departmental counter. To use “Dept. Counter Mode”, a special service setting is necessary. Contact your authorised Panasonic dealer. For instruction on how to set departmental counters, refer to Example : Dept. Counter Mode (see page 18).
  • Page 27 After displaying the counter or copy limit, select “Close”. Press the Reset key to return the machine to the initial screen of the current active mode.

  • Page 28: Example : Date Time Setting

    Example : Date Time Setting When you set the date and time manually, follow the procedures below. The clock of your machine is equipped with D.S.T. (Daylight Saving Time) system. Your clock will be automatically set 1 hour forward on the last Sunday of March. At the end of the daylight saving time (on the last Sunday of October), the clock will be reset to normal.
  • Page 29 Select “20-39”. Select “Change” for “Time Zone” and set the time zone, and then select “OK”. Select “20 Date Time Setting”. Select “OK”. Select “Change” for “Date Time”, and then select “Input”. Enter the date and Select “Close”. time, and then select “OK”. Ex: 1st/January/2009 00:00 Press the Reset key to return the machine to the initial screen of the current active...

  • Page 30: Copier Settings

    3Copier Settings Copier Settings In the Copier Settings, the following items can be changed. General User Mode No. 0 - 9 Parameter Comments Selective Item Standard Setting Margin Value Default Set the default margin. 5 mm, 10 mm, 15 mm, 20 10 mm Edge Value Default Set the default edge.
  • Page 31 Parameter Comments Selective Item Standard Setting N in 1 Default Mode Set the default N in 1 mode. 2 in 1, 4 in 1, 8 in 1 2 in 1 Reduce N in 1 for For N in 1 copy, set whether to leave a margin No, Yes Space between copy images.
  • Page 32 Parameter Comments Selective Item Standard Setting Digital Skyshot Mode Enable or disable the Digital Skyshot mode. No, Normal, Quality Normal • No The Digital Skyshot mode is disabled. • Normal Skyshot is used with standard quality. • Quality Skyshot is used with better quality than “Normal”.
  • Page 33 No. 10 - 19 Parameter Comments Selective Item Standard Setting G-Cl. Detect Mode Set the Ground Colour Detection mode. Tip, Area Sort Priority ADF Selects the sort priority when using the ADF. None, Sort, Shift, Staple, Sort Group, Rotate Shift, Staple, Group When the optional Paper Transport Unit is installed, this setting is available.
  • Page 34 No. 20 - 29 Parameter Comments Selective Item Standard Setting Add User Colour Set the ratio of cyan, magenta, and yellow and 01 to 06 register the mixed colour. Modify User Colour When registering “20 Add User Colour”, modify a registered Colour. Delete User Colour When registering “20 Add User Colour”, delete a registered colour.

  • Page 35: Key Operator Mode

    Key Operator Mode No. 0 - 9 Parameter Comments Selective Item Standard Setting Print Copier Settings Print the Copier Settings list. Stop, Start Start To cancel printing the parameter setting list, select “Stop” and “OK”. While processing the cancellation, panel operation is denied, and an error beep is produced.
  • Page 36 No. 10 - 19 Parameter Comments Selective Item Standard Setting Bleed-through Set the default Bleed-through Prevention. Off, 1 to 6 Prevention Contrast Set the default contrast. -3 to +3 Sharpness Set the default sharpness. -3 to +3 Saturation Set the default colour saturation. -3 to +3 Tint Set the default tint.
  • Page 37 No. 20 - 29 Parameter Comments Selective Item Standard Setting Page Insertion Default Set the default page insertion. Blank, Copy Blank Cover Mode Default Set the default cover mode. F,Blank, F,Blank F,Copy, FB,Blank, FB,Copy (F: Front cover, FB: Front & Back cover) Job Build and SADF Enable or disable SADF mode.
  • Page 38 No. 30 - 39 Parameter Comments Selective Item Standard Setting Colour Spec(Overlay) Set the default overlay colour. Full, Red, Magenta, Full Green, Cyan, Blue, Black, Yellow, White, Preset1, Preset2, Preset3, Preset4, Preset 1 to 6 can be selected when you set Preset5, Preset6 “20 Add User Colour”...
  • Page 39 No. 40 - 44 Parameter Comments Selective Item Standard Setting Copy Customise Set whether to indicate the More Menus functions individually. Reserve a Job Set whether to clear or save the copy job setting Save, Clear Clear Settings of reservation.

  • Page 40: Example : Digital Skyshot Mode

    Example : Digital Skyshot Mode The Digital Skyshot mode allows copying an original without generating dark borders even if the ADF is opened. When copying in the Quality mode combined with “N in 1” or “2 Page”, the Quality mode will be changed to “Normal”...

  • Page 41: Example : Manual Skyshot Mode

    Example : Manual Skyshot Mode In the Manual Skyshot mode, the scanning area (size) is pre-registered into memory (M1 and M2) in advance. This mode also allows copying an original without generating dark borders even if the ADF is opened. An incorrect exposure may occur when there is a black line at the edge of the original.

  • Page 42: Chapter 4 Fax/Email Settings

    4Fax/Email Settings Fax/Email Settings In the Fax/Email Settings, the following items can be changed. For registration of the Address Book or Program keys, refer to Program Destinations/Program Keys in the Operating Instructions (For Facsimile and Internet Fax) of provided CD-ROM. Fax/Email Settings No.

  • Page 43: Key Operator Mode

    If setting a parameter, an asterisk mark (*) will be added before the parameter number. Logo Set the Logo. Up to 25 characters Ex: Panasonic Character ID Set the Character ID. Up to 16 characters Ex: HEAD OFFICE ID No.
  • Page 44 This setting is displayed only when “132 Via Fax Server” in Fax Parameters is set to “Valid”. To use this function, a special service setting is required. Contact your authorised Panasonic dealer. No. 40 - 54 Parameter Comments Selective Item...

  • Page 45: Fax Parameters

    Fax Parameters The contents of Fax Parameter may differ depending on the each country’s regulation or specification. No. 0 - 39 Parameter Comments Selective Item Standard Setting Print Fax ParameterList Print the Fax Parameter List. Stop, Start Start To cancel printing the parameter setting list, select “Stop”...
  • Page 46 Parameter Comments Selective Item Standard Setting Header Print Select the printing position of sender’s Inside, Outside, No Inside information (Header) on the received original. Print • Inside Part of the received image (about 10 mm from the edge) may be missing because it is overwritten with the sender’s information print.
  • Page 47 Parameter Comments Selective Item Standard Setting Receive Mode Select a fax reception method. Manual, Auto Auto • Manual Select manual reception. • Auto Select automatic reception. For the fax reception methods, refer to Receiving Documents in the Operating Instructions (For Facsimile and Internet Fax) of provided CD-ROM.
  • Page 48 Parameter Comments Selective Item Standard Setting Stamp at Memory XMT Set whether to stamp the originals when storing Invalid, Valid Valid them into memory. • Invalid Originals are not stamped. • Valid Originals are stamped. (Depending on the Stamp setting on the Control Panel) Incomplete File Save Set whether the machine retains the document...
  • Page 49 Parameter Comments Selective Item Standard Setting PIN Code Access When the machine is connected to PBX and None, Suffix, Prefix None Personal Identification Number (PIN) code is required, select the access method (Prefix or Suffix) to dial a number with PIN code. •...
  • Page 50 Enable or disable the Remote Diagnostic. Invalid, Valid Valid Diagnostic Password Set the Diagnostic Password. Consult with the authorised Panasonic dealer on how to use this item. Sub-Address Password Set the Sub-Address Password. Up to 20 digits Fax Forward Set whether the machine performs the Fax...
  • Page 51 Parameter Comments Selective Item Standard Setting Rotation XMT Enable or disable the Rotated Transmission Invalid, Valid Valid function. • Invalid An A4/Letter sized portrait original is transmitted as it is. The received document will be reduced or printed on A3 sized paper. Send with 70% Reduction A4 Landscape 100%...
  • Page 52 Parameter Comments Selective Item Standard Setting List Output Tray Select an Output Tray for a printed list. Inner, Outer Inner “Outer” is available when the optional Paper Transport Unit is installed. Duplex Print Enable or disable the duplex printing of a Invalid, Valid Invalid received original.
  • Page 53 No. 120 - 159 Parameter Comments Selective Item Standard Setting Dial Prefix Set the Dial Prefix number (up to 4 digits). When the machine detects a 10-digit telephone number (excluding any characters such as “-”) being dialled, it will automatically append the preset Dial Prefix number.
  • Page 54 Parameter Comments Selective Item Standard Setting Junk Fax Filter • 00 Junk Fax Filter Invalid, Valid Invalid When set to “Valid”, the machine will not receive the faxes from the senders whose numeric ID has been registered as junk fax number.
  • Page 55 Parameter Comments Selective Item Standard Setting LAN RLY XMT Request Enable or disable the LAN Relay Transmission Invalid, Valid Invalid Request Function. Refer to Example : Initial Sending Station (LAN Relay) (see page 66). LAN XMT Reduce Enable or disable Reduced transmission when Invalid, Valid Invalid transmitting a large sized original via Internet...
  • Page 56 Parameter Comments Selective Item Standard Setting POP Timer Set the time interval for the machine to check 0 to 60 (min.) 3 (min.) Email on the POP server. For details about POP reception, refer to Receiving an Email in the Operating Instructions (For Facsimile and Internet Fax) of provided CD-ROM.
  • Page 57 Parameter Comments Selective Item Standard Setting Email Header FMT Set the header information to print when an All, S/F/T Email is received. (Normally used for S/F/T, Off Troubleshooting. It shows the path of the Email transmission before arriving at your machine.) •...
  • Page 58 Invalid, Valid Invalid application to: (a) Program the Internet Parameters (b) Program the Auto Dialer (c) Allow retrieval of the Journal Consult with the authorised Panasonic dealer on how to use this item. No. 160 - 184 Parameter Comments Selective Item...
  • Page 59 Parameter Comments Selective Item Standard Setting XMT File Type Set the default file format for Internet Fax/Email TIFF, PDF TIFF transmission. TIFF must be selected when sending to Internet Fax. PDF can be selected only when sending to computer. Colour Attachment Set the file format for the scanned original Single, Multi Single...

  • Page 60: Example : Receive To Memory

    Example : Receive to Memory The Receive to Memory function secures all received documents by storing them into memory. To print the document(s) received in memory, the Key Operator must enter the correct password. The procedure of setting “Receive to Memory” is described below. For memory reception, refer to Receive to Memory in the Operating Instructions (For Facsimile and Internet Fax) of provided CD-ROM.
  • Page 61 Enter the Identification Code again for Select (7 times). confirmation, and the select “OK”. Each Fax Parameter can be directly selected by inputting the corresponding Select “Close”. number with the Keypad for quick operation. If you know the parameter number, enter the number with the Keypad, and then press the Start key.

  • Page 62: Example : Password-Transmit / Password-Receive

    Example : Password-Transmit / Password- Receive Password-Transmit Sends the original only when the recipient password matches the sender’s password. Password-Receive Receives the document only when the sender’s password matches the recipient password. For setting the Password-Transmit / Password-Receive function, set “43 Password-Transmit” or “44 Password-Receive”...
  • Page 63 Select “40-79”. Select “On”, and then select “OK”. Select “Close”. Select “43 Password-Transmit” or “44 Password-Receive”. Press the Reset key to return the machine to the initial screen of the current active Enter the identification code (4 digits), mode. and then select “OK”. (Ex: Password-Transmit screen, password: 5678) If you made an input error, select “Clear”...

  • Page 64: Example : Select Receive

    Example : Select Receive The Select Receive function prevents receiving unnecessary documents. (Ex: junk fax, direct mail, etc.) The procedure of setting “46 Select Receive” is described below. For more details about Select Receive, refer to Convenient Reception Features in the Operating Instructions (For Facsimile and Internet Fax) of provided CD-ROM.
  • Page 65 Press the Reset key to return the machine Select to the initial screen of the current active mode. Select “46 Select Receive”. Select “Valid”, and then select “OK”. Select “Close”.

  • Page 66: Example : Initial Sending Station (Lan Relay)

    Example : Initial Sending Station (LAN Relay) The following setting is required for selecting whether the machine performs the LAN Relay XMT Request. Enabling the LAN relay request function Fax Parameter 140: LAN RLY XMT Request Set the above item according to the descriptions. For more details on Initial Sending Station (LAN Relay), refer to Using the Relay Feature in the Operating Instructions (For Facsimile and Internet Fax) of provided CD-ROM.
  • Page 67 Select “Close”. Select “120-159”, and then select (4 times). Each Fax Parameter can be directly selected by inputting the corresponding number with the Keypad for quick operation. If you know the parameter number, enter the number with the Keypad, and then press the Start key.

  • Page 68: Example : Relay Station (Lan Relay)

    Example : Relay Station (LAN Relay) To set up your machine as a Relay Station, the following settings are required. Enabling the LAN Relayed Transmission function Fax Parameter 142: Relay XMT Setting the Communication Journal Fax Parameter 143: Relay XMT Report Setting the LAN Relay Password User Parameter 40: Relay XMT Password Setting the Manager’s Email Address...
  • Page 69 Select “120-159”, and then select (4 times). Each Fax Parameter can be directly selected by inputting the corresponding number with the Keypad for quick operation. If you know the parameter number, enter the number with the Keypad, and then press the Start key.

  • Page 70: Relay Xmt Report (Fax Parameter 143)

    Relay XMT Report (Fax Parameter 143) Select how the Relay XMT Report is sent to the originator. Select “143 Relay XMT Report”. Select how the Relay XMT Report is sent, and then select “OK”. Select “Close”. Advance to Relay XMT Password (User Parameter 40) (See page 71), and set the relay transmission password.

  • Page 71: Relay Xmt Password (User Parameter 40)

    Relay XMT Password (User Parameter 40) Enter a Relay XMT Password (up to 10 characters) to be used for protection against unauthorised (outside) stations from accessing your machine to relay messages to a G3 fax machine via PSTN. This password should be given out to authorised personnel only. Select “00 User Parameters”.

  • Page 72: Manager's Email Addr (User Parameter 30)

    Manager’s Email Addr (User Parameter 30) Enter the department manager’s Email address for notification of all Internet Relayed transmissions for supervision and cost control purposes. Select “20-39”, and then select times). Select “30 Manager's Email Addr”. Enter the Email address (up to 60 characters), and then select “OK”.

  • Page 73: Relay Domain 01 To 10 (User Parameters 45 To 54)

    Relay Domain 01 to 10 (User Parameters 45 to 54) Enter domain name(s) (up to 10) that have been authorised to access your Internet Fax for Relayed XMT Request. Select “Close”. Select “40-54”, and then select Press the Reset key to return the machine to the initial screen of the current active Select domain names from “45 Relay mode.

  • Page 74: Scanner Settings

    5Scanner Settings Scanner Settings In the Scanner Settings, the following items can be changed. For details about the Address Book registration, refer to Adding an Email Address to Address Book in the Operating Instructions (For Scanner and Email) of provided CD-ROM. General User Mode No.
  • Page 75 No. 20 - 29 Parameter Comments Selective Item Standard Setting Add New Address Add a computer IP Address to the Address Book. Parameter No. 20, 23, and 25 do not require setting as the IP Address (for Add New Email Address Add an Email address to the Address Book.

  • Page 76: Key Operator Mode

    Key Operator Mode No. 0 - 4 Parameter Comments Selective Item Standard Setting Print Scanner Settings Print the Scanner Settings list. Stop, Start Start To cancel printing the parameter setting list, select “Stop” and “OK”. While processing the cancellation, panel operation is denied, and an error beep is produced.

  • Page 77: Printer Settings

    6Printer Settings Printer Settings In the Printer Settings, the following items can be changed. For printing, however, these settings are unnecessary as the computer application software is usually used to set up printing. Settings by computer application software have priority over the ones in this machine. If the Printer Settings in the machine are required, consult with a computer literate person.
  • Page 78 Card, PDF files using PS, or Word/ ® PowerPoint /PDF files using MCP*2. Image files only MCP (Memory Card Printing Utility) can be downloaded from the Panasonic Web site: http://panasonic.net/pcc/support/ office_products.html • 01 SD/USB Memory Def. Dir. DCIM, Scan Img DCIM Set the default directory.
  • Page 79 Parameter Comments Selective Item Standard Setting SD Print Settings • 05 Contrast -3 to +3 Set the default contrast. • 06 Brightness -3 to +3 Set the default brightness. • 07 Saturation -3 to +3 Set the default colour saturation. •...

  • Page 80: Key Operator Mode

    Key Operator Mode No. 0 - 9 Parameter Comments Selective Item Standard Setting Print Printer Settings Print the Printer Settings list. Stop, Start Start To cancel printing the parameter setting list, select “Stop” and “OK”. While processing the cancellation, panel operation is denied, and an error beep is produced.
  • Page 81 No. 10 - 19 Parameter Comments Selective Item Standard Setting Mailbox Data Holding Set the limit of storing the data in the mailbox. Infinity, 1 day, 2 days, 7 days When “Infinity” is set, data is not deleted. 3 days, 4 days, 5 days, 6 days, 7 days Delete Mailbox Data Select the mailbox data to be deleted.
  • Page 82 Parameter Comments Selective Item Standard Setting MCP Server When “01 General (03 DNS)” in the Network Up to 60 characters Settings and “25 Use MCP Server” in Printer “SSL” Settings are set to “Yes”, set MCP (Memory Off: 8083 Card Printing) server name. On: 8084 When “01 General (03 DNS)”...
  • Page 83 No. 40 - 44 Parameter Comments Selective Item Standard Setting Banner Sheet Set the page position in banner sheet. None, Top, Last, None Top&Last Print job via PC only (included MCP/DPS) Banner Sheet will not be finished (Sort, Staple, Punch). Banner Sheet will be counted with 1 count of monochrome image.

  • Page 84: Network Settings

    7Network Settings Network Settings In the Network Settings, the following items can be set. The Key Operator Password is required to open the Network Settings screen. After setting parameters for the Network Settings, turn the machine's power switch Off, and then On again. Key Operator Mode No.
  • Page 85 Parameter Comments Selective Item Standard Setting General • 01 TCP/IP Address 3 digits x 4 0. 0. 0. 0 Set the IP Address. • 02 TCP/IP Subnet Mask 3 digits x 4 0. 0. 0. 0 Set the Subnet Mask. •...
  • Page 86 Set the SNMP community name (RW). • 05 SysContact Up to 31 characters Set the system management name. • 06 SysName Up to 31 characters Panasonic DP-XXXX Set the system name. • 07 SysLocation Up to 31 characters Set the system installation location.
  • Page 87 Enter the Hostname portion (FQDN or IP address) of the URL which is used for accessing the machine. Ex: For the URL “https://mfp.panasonic.com/”, enter “mfp.panasonic.com”. • “Country Code” Enter “ISO 3166-1-alpha-2 code” (example for US). • “Valid from” Enter the date which the certificate is valid from.
  • Page 88 (for Adobe PostScript 3) is installed. There is no default value. When the machine starts up with “05 Bonjour” set to “On”, “Panasonic DP-XXXX and the lower six figures of MAC Address” will be automatically set up. • 06 SMTP Off, On Set whether to use SMTP.
  • Page 89 (for Adobe PostScript 3) is installed. There is no default value. When the machine starts up with “05 Bonjour” set to “On”, “Panasonic DP-XXXX and the lower six figures of MAC Address” will be automatically set up. 06 Bonjour Name Up to 31 characters Set the name of Bonjour.
  • Page 90 There is no default value. When the machine starts up with “10 AppleTalk” set to “On”, and “11 AppleTalk Zone Name” and “12 AppleTalk Printer Name” not set, “Panasonic DP-XXXX and the lower six figures of MAC Address” will be automatically set up.
  • Page 91 Parameter Comments Selective Item Standard Setting EMAIL 09 APOP Authentication Off, On Set whether to encrypt the protocol for the POP password security when connecting with the POP server. (This setting depends on the server. Consult with the network manager.) LDAP 00 LDAP Server Up to 60 characters...

  • Page 92: Example : Ldap Server

    Example : LDAP Server To search an Email address or a fax number on LDAP server, the following user parameter settings are required. LDAP Server Name or LDAP Server IP 04 LDAP: 00 LDAP Server LDAP User Name 04 LDAP: 01 LDAP User Name LDAP Password 04 LDAP: 02 LDAP Password LDAP Search Base...
  • Page 93 Select “04 LDAP”. Select the authentication method, and then select “OK”. Select “00 LDAP Server”. None Authentication is not required. NTLM Selects NTLM. Clr Text Selects CLEAR TEXT. Kerberos Selects Kerberos. To select “Kerberos” for the authentication method, set “01 General (03 DNS)” to “Yes” in Function Parameters (Network Settings >...
  • Page 94 Enter the DNS domain name, and then select Enter the port number (up to 5 digits), “OK”. (Up to 60 characters) and then select “OK”. Advance to “01 LDAP User Name”, “02 Select “Off” or “On”, and then select “OK”. LDAP Password”, and “03 LDAP Search Base”, and set the related settings.

  • Page 95: Ldap User Name / Ldap Password / Ldap Search Base

    LDAP User Name / LDAP Password / LDAP Search Base Press the Reset key to return the machine Select “01 LDAP User Name”, “02 to the initial screen of the current active LDAP Password”, or “03 LDAP mode. Search Base”. Enter LDAP User name (up to 40 characters), Password (up to 30 characters) or Search Base (up to 60...

  • Page 96: Counter View

    8Counter View Counter View “Counter View” allows to confirm the number of prints, etc. The Counter View items are listed below. No. 0 - 19 Parameter Comments Print Counter List Print a Counter List. Total Print Count B/W Count numbers of Black Print. Total Print Count 1C Count numbers of Mono Colour Print.
  • Page 97 Average Coverage % 4C Average of the cover range for the 4-Colour print. Average Coverage % B/W Average of the cover range for the Black and White print. To use this function, a special service setting is required. Contact your authorised Panasonic dealer.

  • Page 98: Example : Print Counter List

    Example : Print Counter List Print the Counter View information. Customer name, signature and date, customer ID, fax number, and serial number are printed on the lower right corner. While processing the cancellation, the panel Press the Function key. operation is denied, and an error beep is produced.

  • Page 99: Example : Clear Toner Counter

    Example : Clear Toner Counter After replacing the Toner Cartridge, the Toner Counter will be cleared automatically. If you want to clear the Toner Counter manually, the following procedure is required. Press the Function key. Select “Yes” to clear the Toner Counter.

  • Page 100: Index

    9Appendix Index Numerics Check then Print Qty ............81 Clear Toner Counter BK ..........97 2-Side Orig. Bound Edge ..........74 Clear Toner Counter C ...........97 2-Sided Count ..............97 Clear Toner Counter M ...........97 2-Sided Mode Default ............ 30 Clear Toner Counter Y ..........97, 99 2-Sided Original Def.
  • Page 101 Density (HOME) .............45 HD Drive Lock Settings ..........16 Density (Other Type) ............35 Header Format ............... 46 Density Default ...............74 Header Print ..............46 Department Code ............50 Hole Punch ..............82 Departmental Counter ........10, 23, 26 Hole Punch Default ............33 Dept.
  • Page 102 Paper Size Priority ............35 Paper Tray ..............77 M1, Size ................. 37 Password-Receive ...........49, 63 M2, Size ................. 37 Password-Transmit ..........49, 63 MAC Address ..............84 PC Print Count 2C ............96 Magenta Drum Unit ............96 PC Print Count 4C ............96 Magenta Img.
  • Page 103 Received ID Print ............54 SMB Device Name ............88 Reduce N in 1 for Space ..........31 SMB Master Browser ............. 88 Reduction Ratio ..............47 SMB Workgroup Name ..........89 Re-enter Direct Dial ............54 SMTP ................88 Relay Domain (01) ...........44, 73 SMTP AUTH Name ............
  • Page 104 Via Fax Server ............... 53 Weekly Timer ..............14 Wide A4 ................. 78 WINS Server 1 IP ............85 WINS Server 2 IP ............85 XMT File Type ............... 59 XMT Reduction .............. 48 Yellow Drum Unit ............96 Yellow Image Area(Avg.) ..........97 Yellow Image Area(Last) ..........
  • Page 105 Appendix Memo...
  • Page 106 For Customer Support: Panasonic Communications Co., Ltd. Fukuoka, Japan http://panasonic.net X1208-1019 (04) © Panasonic Communications Co., Ltd. 2009 PJQMC1383ZB Unauthorised copying and distribution is a violation of law. January 2009 The contents of these Operating Instructions are subject to change without notice.

This manual is also suitable for:

Dp-c306Dp-c266

Table of Contents