Panasonic DP-MB500 series Operating Instructions Manual page 65

• Select Fax or Email Fax.
3. Select the desired broadcast key.
4. Program items.
Using station 1-3:
Press the desired station key.
Using station 4-6:
Press /LOWER , then press the desired station key.
• The number in brackets indicates the number of registered items.
• To program other items, repeat this step.
• If you have programmed the wrong item, press
5. OK/SET
6. Press /STOP repeatedly to exit.
Adding a new item into the broadcast memory
1.
: /MENU (repeatedly): "BROADCAST SETUP"
: Display "Broadcast" screen (page 62).
• Select Fax or Email Fax.
Fax.
2.
Select the desired broadcast memory location.
3.
Select the item you want to add.
• To add other items, repeat this step.
*1
For 2-line LCD models only. (
Erasing a stored item from the broadcast memory
For 2-line LCD models (
1.
/MENU (repeatedly): "BROADCAST SETUP"
2.
Select the desired broadcast memory location.
3.
Select "EACH".
4.
Select the item you want to erase.
5.
OK/SET
For touch panel models (
1.
Display "Broadcast" screen (page 62).
2. Select the desired broadcast memory location.
3.
Select the desired item.
4.
"Delete" "OK"
4.2.5 Programming items into the broadcast memory
OK/SET . To use the broadcast memory for Internet fax, select Email Fax.
OK/SET . To use the broadcast memory for Internet fax, select Email
*1
OK/SET
*1
)
):
OK/SET
OK/SET
):
/STOP to erase the item.
OK/SET
OK/SET *1 /Tone
OK/SET
OK/SET
Operating Instructions 65