Using Other Applications; Programming Features: Scan - Panasonic DP-MB500 series Operating Instructions Manual

• You can save images in TIFF, JPEG, PNG, BMP or PDF formats. To change the format, click [File]
[Environment Setup], and then change the settings in [TWAIN] tab.
• If the [Select] button is displayed in [Target Device], click [Select] to select the unit from the list, and then
click [OK].
The [Select] button will not be displayed when there is only one printer driver installed.
• You can move, copy and delete a file or page.

6.3.3 Using other applications

Multi-Function Station includes a TWAIN and WIA compliant scanner driver. You can also scan using other
applications that support TWAIN or WIA scanning. For scanning example, proceed as follows:
1.
Set the original.
2.
Start an application that supports TWAIN or WIA scanning.
3.
Select the following from the menu.
For TWAIN scanning: [Acquire Image]
For WIA scanning: [From scanner or camera]
4.
If necessary, change the scanning settings on your computer.
• The scanned image will be displayed in the application window after scanning.
Note
• Scanning from WIA compliant applications is only available via a USB connection.
• Depending on the application used, the appearance may differ slightly.
• If the [Select] button is displayed in [Target Device] when performing TWAIN scanning, click [Select] to
select the unit from the list, and then click [OK].
The [Select] button will not be displayed when there is only one printer driver installed.

6.4 Programming features: Scan

To change the feature settings, see page 49 for details.
Feature
Scan mode
Scan parameter
hold
Code Description
#493 To set the scan mode for Push Scan. See page 80 for
details.
#494 To hold the previous scanning parameter for Push Scan.
When this feature is activated, the unit will hold the previous
scan settings for each mode of push scan.
6.3.3 Using other applications
[Scan]
Default
key
Operating Instructions
1
0
85