Table of Contents
Advertisement
8.9 Programming features: Fax
Feature
Confirming the
next document
Direct SMTP
Delivery notice
POP timer setting
Fax send notify
Activating the
Distinctive Ring
feature
Setting the ring
pattern for fax
(Distinctive Ring
feature)
Auto reduction
Fax activation
code
Silent fax ring
count
124
Operating Instructions
Code
Description
#424
When this feature is activated, after the document is
scanned using the automatic document feeder during fax
memory transmission, the message shows to confirm the
next document. Insert the next document and press
OK/SET /
#425
For registering an email address when this feature is
activated, you can set the direct SMTP for the email
address.
#426
When this feature is activated, a delivery notice is sent to the
receiver of the Internet fax. If the receiver returns the notice,
a sending report will be printed.
#428
To set the POP timer.
Set the POP timer (the interval of receiving Internet fax
automatically) to a value between "00" and "60" minutes
using the dial keypad.
• The default is "03" minutes.
• If you do not want to receive an Internet fax automatically
(page 121), set the timer to "00".
#429
To set the unit to alert you with a beeping sound after fax
transmission is finished.
#430
To activate the Distinctive Ring feature. See page 143 for
details.
#431
To set the ring pattern for fax (Distinctive Ring feature). See
page 143 for details.
• "A": Standard ring (one long ring)
• "B": Double ring (two short rings)
• "C": Triple ring (short-long-short rings)
• "D": Other triple ring (short-short-long rings)
• "B-D": The fax will respond to all calls with ring tone
patterns "B", "C", and "D".
#432
To receive a fax document that is longer than your recording
paper. When this feature is activated, the unit will fit received
documents onto your recording paper.
#434
If you wish to use an extension telephone to receive faxes,
activate this feature and program the activation code. When
entering the code, use the dial keypad.
• The default code is "
Important
• The fax activation code must be different from the
code that you programmed on the answering
machine.
#436
To change the number of times the unit rings while in
TEL/FAX mode.
Note
• See page 109 for details.
: "OK".
/START
#9".
Default
key
0
:
0
1
–
0
0
5
1
–
3
Hide quick links:
Advertisement
Table of Contents
