S8700-Series Port Connections - Avaya S8700-Series Installing And Configuring

Chapter 1: Introduction

S8700-series port connections

The network cable connections depend on the type of server, type of memory duplication, and
the type of control network. All cables are CAT5 or better patch cables except for the fiber cable
that interconnects the DAL2 cards for hardware duplication.
For a guide to connect the cables to the servers for hardware duplication on the S8730
l
Server, see
(S8730)
For a guide to connect the cables to the servers for hardware duplication on the S8720 or
l
S8710 Server, see,
duplication (S8720/S8710)
For a guide to connect the cables to the servers for software duplication on the S8730
l
Server, see
(S8730)
For a guide to connect the cables to the servers for software duplication on the S8720 or
l
S8710 Server, see,
duplication (S8720/S8710)
18 Installing and Configuring the Avaya S8500-Series Server
Figure 1: Duplication and control network cabling for hardware duplication
on page 19.
Figure 2: Duplication and control network cabling for hardware
on page 20.
Figure 3: Duplication and control network cabling for software duplication
on page 21.
Figure 4: Duplication and control network cabling for software
on page 22.