Chapter 4: Server configuration
After you install the Communication Manager software, you must configure the server.
This section covers the following tasks:
Creating a super-user login
l
Installing the license and authentication files
l
Configuring the server manually
l
Running the Avaya Installation Wizard
l
Verifying the server connection to the customer LAN (if provided)
l
Configuring the modem
l
Configuring memory for an S8720 Server
l
Enabling firewall settings
l
Enabling network time servers
l
Note:
Ensure that you have the completed Electronic Preinstallation Worksheet (EPW)
Note:
before you start this process.
Note:
Ensure that your networking and Web browser settings are correct. For more
Note:
information, see
Methods of Configuring a server
The server can be configured using one of the following methods:
1.
Configuring the server manually
2. The Avaya Installation Wizard with the Electronic Pre-installation Worksheet (EPW)
3. The Avaya Installation Wizard interactively
on page 40
on page 42
on page 47
on page 48
on page 49
on page 51
on page 51
Configuring the network for Windows 2000 and XP
on page 42 using System Management Interface
Methods of Configuring a server
on page 41
on page 47
on page 104.
Issue 8 May 2009
39