Table of Contents
Advertisement
2
Hardware Installation
2.9.4 VGA Port
The system board can only be used with an analog video monitor.
Connect the monitor' s 15-pin D-shell cable connector to the VGA
port (CN1 - Blue). If your monitor suppor ts analog video but does
not have a 15-pin D-shell connector, see your monitor dealer for the
adapter or optional cable. After you plug the monitor cable into the
VGA port, gently tighten the cable screws to hold the connector in
place. Some monitors have a switch that chooses between analog
and TTL (or digital) operation. If your monitor has such a switch, set
it for analog. You can configure the display in the Advanced Chipset
Features submenu of the BIOS.
34
VGA Port
CN1
Advertisement
Table of Contents
