Jumper Settings For Usb Wake Up - DFI-ITOX GIC68-B User Manual

2
Hardware Installation

2.6 Jumper Settings for USB Wake Up

USB 1/2
wake up
USB 3/4
wake up
USB Wake Up Settings - Jumpers JP2 and JP3
The Wake-On-USB Keyboard function allows you to use a USB
keyboard to wake up a system from the S3 (STR - Suspend To
RAM) state.
JP2 - for the USB keyboard that is connected to the USB 3 or USB
4 port.
JP3 - for the USB keyboard that is connected to the USB 1 or USB
2 port.
By default, this function is disabled. To use this function, set the
appropriate jumper - pins 2 and 3 to On. "USB KB Wake-Up From
S3" in the Power Management Setup submenu of the BIOS must
also be enabled.
26
1
2
3
(JP3)
1 2 3
(JP2)
1 2
1
2
3
JP2
JP3
1-2 On: VCC - Disabled
(default)
3
JP3
2-3 On: 5VSB - Enabled
1 2 3
1
2
3
JP2