Vga Port - DFI-ITOX G4V620-N User Manual

2
Hardware Installation

2.6.4 VGA Port

VGA
The system board can only be used with an analog video monitor.
Connect the monitor' s 15-pin D-shell cable connector to the VGA
port (Blue) at location CN2. If your monitor suppor ts analog video
but does not have a 15-pin D-shell connector, see your monitor
dealer for the adapter or optional cable. After you plug the monitor
cable into the VGA port, gently tighten the cable screws to hold the
connector in place. Some monitors have a switch that chooses
between analog and TTL (or digital) operation. If your monitor has
such a switch, set it for analog.
BIOS Setting
Enable or disable the onboard VGA in the Advanced Chipset
Features submenu of the BIOS. Refer to chapter 3 for more
information.
Driver Installation
Install the "Intel LAN Drivers" contained in the provided CD into
your system.
29