DFI-ITOX GIC68-B User Manual page 84

3
Award BIOS Setup Utility
Power On By Ring_conn
Set this field to Enabled to use the modem ring-on function. This will
allow your system to power-on to respond to calls coming from an
external or internal modem. Refer to "Wake-On-Ring Connector" in
chapter 2 for more information.
Wake Up On LAN_conn
If you are using a LAN card that suppor ts the remote wake up
function, set this field to Enabled. The will allow the network to
remotely wake up a Soft Power Down (Soft-Off) PC. However, if
your system is in the Suspend mode, you can wake up the system
only through an IRQ or DMA interrupt. Refer to "Wake-On-LAN
Connector" in chapter 2 for more information.
USB KB Wake-Up From S3
Set this field to Enabled to use the Wake-On-USB Keyboard
function. This function allows you to use a USB keyboard to wake up
a system from the S3 (STR - Suspend To RAM) state. Refer to
"Jumper Settings for USB Wake Up" in chapter 2 for more
information.
CPU Thermal-Throttling
We recommend that you leave this field in its default setting.
Resume By Alarm
Enabled When Enabled, you can set the date and time you
Disabled Disables the automatic power-on function. (default)
84
would like the Soft Power Down (Soft-Off) PC to
power-on in the "Date (of Month) Alarm" and "Time
(hh:mm:ss) Alarm" fields. However, if the system is being
accessed by incoming calls or the network (Resume On
Ring/LAN) prior to the date and time set in these
fields, the system will give priority to the incoming calls
or network.