Table of Contents
Advertisement
2
Hardware Installation
VGA Port
VGA
The VGA port is used for connecting a VGA monitor. Connect the monitor's 15-pin
D-shell cable connector to the VGA port. After you plug the monitor's cable con-
nector into the VGA port, gently tighten the cable screws to hold the connector
in place.
BIOS Setting
Configure the onboard VGA in the Chipset menu ("North Bridge Chipset Configu-
ration" submenu) of the BIOS. Refer to chapter 3 for more information.
Driver Installation
Install the graphics driver. Refer to chapter 4 for more information.
33
Advertisement
Table of Contents
