Table of Contents
Advertisement
The onboard VGA shares 1MB of the system memory. This is fixed
regardless of the size of the system memory. Aside from the 1MB
shared memory, it also uses Dynamic Video Memor y Technology
(DVMT). DVMT freely changes in size because graphics memory is
allocated from the system memory according to current needs. Refer
to chapter 1 for the type of memory supported by the system
board.
2.2.2 Installing the DIM Module
A DIM module simply snaps into a DIMM socket on the system
board. Pin 1 of the DIM module must correspond with Pin 1 of the
socket.
Tab
Pin 1
1. Pull the "tabs" which are at the ends of the socket to the side.
2. Position the DIMM above the socket with the "notches" in the
module aligned with the "keys" on the socket.
3. Seat the module vertically into the socket. Make sure it is
completely seated. The tabs will hold the DIMM in place.
Hardware Installation
Notch
Key
2
Tab
19
Advertisement
Table of Contents
