Table of Contents
Advertisement
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode after checking your drive.
Auto The BIOS will automatically set the system according to
your hard disk drive's timing.
Mode 0-4 You can select a mode that matches your hard disk
drive's timing. Caution: Do not use the wrong setting
or you will have drive errors.
IDE Primary Master/Slave UDMA and IDE Secondary Master/
Slave UDMA
These fields allow you to set the Ultra DMA in use. When Auto is
selected, the BIOS will select the best available option after checking
your hard drive or CD-ROM.
Auto
The BIOS will automatically detect the settings for you.
Disabled The BIOS will not detect these categories.
USB Controller
We recommend that you leave this field in its default setting -
Enabled.
USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this
function.
Init Display First
This field is used to select whether to initialize the onboard VGA or
PCI first when the system boots.
Onboard When the system boots, it will first initialize the
onboard VGA.
PCI Slot
When the system boots, it will first initialize PCI.
AC97 Audio
Auto
Select this option when using the onboard audio codec,
primary or secondary audio riser card, or audio/modem
riser card.
Disabled Select this option when using a PCI sound card.
Award BIOS Setup Utility
3
75
Advertisement
Table of Contents
