Table of Contents
Advertisement
IDE HDD Auto Detection
IDE Primary Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
↑↓→← :Move
Enter:Select
F5:Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
IDE HDD Auto Detection
Detects the parameters of the dr ive. The parameters will
automatically be shown on the screen.
IDE Primary Master/Slave and IDE Secondary Master/Slave
If you wish to define your own drive type manually, select "Manual".
The drive type information should be included in the documentation
from your hard disk vendor. If you select "Auto", the BIOS will auto-
detect the HDD & CD-ROM drive at the POST stage and show
the IDE for the HDD & CD-ROM drive. If a hard disk has not
been installed, select "None".
Access Mode
For hard drives larger than 528MB, you would typically select the
LBA type. Certain operating systems require that you select Normal
or Large. Please check your operating system's manual or Help desk
on which one to select.
Award BIOS Setup Utility
Phoenix - AwardBIOS CMOS Setup Utility
IDE Primary Master
Press Enter
Auto
Auto
0 M
0
0
0
0
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Item Help
Menu Level
Change the day, month,
year and century
ESC:Exit
F1:General Help
F7:Optimized Defaults
3
61
Advertisement
Table of Contents
