Table of Contents
Advertisement
2
Hardware Installation
2.5 Jumper Settings for PS/2 Wake Up
PS/2 Wake Up Settings - Jumper JP1
The Wake-On-Keyboard/Wake-On-Mouse function allows you to use
the keyboard or PS/2 mouse to power-on the system. By default,
JP1 is disabled. To use this function, set JP1 to 2-3 On. "Power On
Function" in the Integrated Peripherals submenu of the BIOS must
be set accordingly. Refer to chapter 3 for details.
.
.
.
.
.
.
.
.
24
1
2
3
PS/2 wake up
(JP1)
1-2 On: VCC - Disabled
(default)
Warning:
1. If JP1 was enabled with a password set in the "KB Power
On Password" field, and now you wish to disable the
keyboard password function, make sure to set the "Power
On Function" field to "Button Only" prior to setting JP1 to
disabled. You will not be able to boot up the system if you
fail to do so.
1
2
3
2-3 On: 5VSB - Enabled
1
2
3
Advertisement
Table of Contents
